American Flag Catchall Tray - Design by Zach McCullough
Design your own stunning American Flag Catchall Tray with these CNC router files! These files will create an American Flag Catchall Tray that is 11 inches wide by 5.5 inches high by 3/4 inches thick.
What's Included:
Complete American Flag Catchall Tray Project: You will receive the digital file that can be used to carve your American Flag Catchall Tray Project using a CNC router. The file is compatible with various CNC router software.
Toolpaths Included for Vcarve and Carbide Create
SVG’s, DXF’s, and supporting files are also included
Tools Used:
1/4” Downcut Endmill
3/4” Bowl and Tray Bit
60 degree Vbit
Note: This listing is for digital files only. Physical materials and tools are not included.
Files will be sent to your email for download after purchase.
Terms: You may use these files to make and sell the physical items YOU make. You may edit these files to fit your project needs. Selling or sharing these digital files in any way is strictly prohibited.
Design your own stunning American Flag Catchall Tray with these CNC router files! These files will create an American Flag Catchall Tray that is 11 inches wide by 5.5 inches high by 3/4 inches thick.
What's Included:
Complete American Flag Catchall Tray Project: You will receive the digital file that can be used to carve your American Flag Catchall Tray Project using a CNC router. The file is compatible with various CNC router software.
Toolpaths Included for Vcarve and Carbide Create
SVG’s, DXF’s, and supporting files are also included
Tools Used:
1/4” Downcut Endmill
3/4” Bowl and Tray Bit
60 degree Vbit
Note: This listing is for digital files only. Physical materials and tools are not included.
Files will be sent to your email for download after purchase.
Terms: You may use these files to make and sell the physical items YOU make. You may edit these files to fit your project needs. Selling or sharing these digital files in any way is strictly prohibited.
Design your own stunning American Flag Catchall Tray with these CNC router files! These files will create an American Flag Catchall Tray that is 11 inches wide by 5.5 inches high by 3/4 inches thick.
What's Included:
Complete American Flag Catchall Tray Project: You will receive the digital file that can be used to carve your American Flag Catchall Tray Project using a CNC router. The file is compatible with various CNC router software.
Toolpaths Included for Vcarve and Carbide Create
SVG’s, DXF’s, and supporting files are also included
Tools Used:
1/4” Downcut Endmill
3/4” Bowl and Tray Bit
60 degree Vbit
Note: This listing is for digital files only. Physical materials and tools are not included.
Files will be sent to your email for download after purchase.
Terms: You may use these files to make and sell the physical items YOU make. You may edit these files to fit your project needs. Selling or sharing these digital files in any way is strictly prohibited.
